Chain Link Fence Systems
Popular & Practical
Chain link fencing is popular and practical and is among the least expensive to install. With varying heights, different gauges, and a range of color coatings, this fencing can be customized for a variety of applications.
When properly installed, this fencing doesn’t require much maintenance at all. Thanks to galvanized, aluminized, or vinyl coating, it won’t rust or gather dirt. With the benefit of visibility, this type of fence is incredibly tough, as it’s made from interlocking coated steel wire. The strong steel of a chain-link fence can create a secure barrier and additions, such as barbed wire, can be added at the top to prevent climbing.
Pricing will be available upon request due to fluctuations in the steel industry for the following chain link fence items:

Colors & Materials: Galvanized and Black Vinyl Coated
Grade: Residential and Commercial
Gates: Pedestrian, Double Drive, and Cantilever Slide
In-Stock Options
Chain Link Fence System Components
* Available in Black
Post Cap Options

Aluminum Post Cap*
Sizes:
- 1 – 3/8″
- 1 – 5/8″
- 1 – 7/8″
- 2 – 3/8″
- 2 – 7/8″
- 3 – 1/2″
- 4″

Pressed Steel Post Cap
Sizes:
- 1 – 3/8″
- 1 – 5/8″
- 1 – 7/8″
- 2 – 3/8″
- 2 – 7/8″
- 3 – 1/2″
- 4″
- 6 – 5/8″
Gate Latches

Commercial Double Drive Gate Latch
(Hot Dip Galvanized)
- Heavy-duty steel construction
- 2 padlock locations
- Fits 1-5/8″ or 1-7/8″ gate frames
- If used without keeper for a single gate, it may still be padlocked

Residential Double Gate Latch
(Hot Dip Galvanized or Black Zinc)
Plated Steel and Powder Coated
- Heavy-duty steel construction
- 2 padlock locations
- If used without keeper for a single gate, it may still be padlocked
- Fits 1-3/8″ gate frames

Gate Fork Latch
(Malleable, Complete)
Sizes:
- 1-5/8″ x 1-7/8″
- 1-5/8 x 2-3/8″
- 1-5/8″ x 2-7/8″
- 1-5/8″ x 4″

Butterfly Latch
(AL/Pressed Steel)
Sizes:
- 1-3/8″ x 1-7/8″
- 1-3/8″ x 2-3/8″

Flat Back Fork Latch
(Malleable, Complete)
Sizes:
- 1-3/8″

Cantilever Gate Latch
(Malleable)
Latches up to a 1-7/8″ post
Sizes:
- 2-7/8″
- 4″
Hardware

Fork*
(Pressed Steel)
Sizes:
- 1-3/8″
- 1-5/8″
- 2″
- 2-1/2″
- 3″
- 4″

Pressed Steel Collars*
(Pressed Steel)
Sizes:
- 1-3/8″
- 1-5/8″
- 1-7/8″

Heavy-duty Self-Closing Hinge
Sizes:
- Fits 1-3/8″ to 1-7/8″ gate frames
- Fits 4″ posts

Bulldog Hinge*
(Pressed Steel)
Fits 1-5/8″ to 1-7/8″ gate frames
Sizes:
- 2-3/8″
- 2-7/8″
- 4″
- 6-5/8″

Malleable Box Hinge
(Malleable Ball & Socket Type)
All fit 1-5/8″ or 1-7/8″ gate frame
Size:
- 2-3/8″
- 2-7/8″
- 3-1/2″
- 4″
- 6-5/8″

Industrial Box Hinge
(Pressed Steel)
All fit 1-5/8″ or 1-7/8″ gate frame
Size:
- 2-3/8″
- 2-7/8″
- 4″

Industrial 180 Degree Hinges
(Pressed Steel, Complete, 4mm Thickness)
Fits gate frames 1-5/8″ or 1-7/8″
4mm thickness
Sizes:
- 2-3/8″
- 2-7/8″
- 4″
- 6-5/8″

Industrial Offset Hinges
(Malleable, Complete)
Fits gate frames 1-5/8″ or 1-7/8
Sizes:
- 1-3/8″
- 1-5/8″
- 1-7/8″

Female Gate Hinges
(Pressed Steel without Bolts)
1″ Width, 3/16″ ga
Sizes:
- 1-3/8″ x 5/8″
- 1-5/8″ x 5/8″
- 1-7/8″ x 5/8″

Male Post Hinges
(Pressed Steel without Bolts)
1″ Width, 3/16″ ga
Sizes:
- 1-3/8″ x 5/8″
- 1-5/8″ x 5/8″
- 1-7/8″ x 5/8″
- 2-3/8″ x 5/8″
- 2-7/8″ x 5/8″

Wall Mount Hinge
(Pressed Steel)
Plate is 3″ x 4-1/2″

Nylon Cantilever Rollers
(Cast Steel Housing / Double-Sealed Bearings)
4″ x 2-3/8″

Bottom Guide Assembly
Sizes:
- Round 4″
- Round 6-5/8″
- Side Mount Round 6-5/8″

Gate Wheels*
- Zinc-plated steel with powder-coated finish
- Composite wheel designed for rougher uneven surfaces and large temperature ranges
- Attached easily
- V-notch TM styling
- May be used on any flat surface
- Fits 1-3/8″, 1-5/8″, and 2″ size gate frames

Aluminum-Offset Rail Ends*
Sizes:
- 1-3/8″
- 1-5/8″

Pressed Steel Half Moon Rail Ends*
Sizes:
- 1-5/8″

Aluminum Ball Top Loop Caps*
Sizes:
- 1-5/8″ x 1-3/8″
- 1-7/8″ x 1-3/8″
- 1-7/8″ x 1-5/8″
- 2-3/8″ x 1-5/8″

Aluminum Loop Caps*
Sizes:
- 1-5/8″ x 1-3/8″
- 1-7/8″ x 1-3/8″
- 1-7/8″ x 1-5/8″
- 2-3/8″ x 1-5/8″

Pressed Steel Heavy Gate Corner Clamps
(Without Rivet)
Sizes:
- Top 1-5/8″
- Bottom 1-5/8″

Pressed Steel Panel Clamps
Sizes:
- 1-3/8″
- 1-5/8″

Pressed Steel Saddle Clamps
(4MM)
Sizes:
- 1-3/8″ x 1-3/8″
- 1-5/8″ x 1-5/8″

Pressed Steel Sleeves*
Sizes:
- 1-3/8″ x 6′
- 1-5/8″ x 6″

Pressed Steel Boulevard Clamps*
(2 PCS Per Set)
Sizes:
- 1-3/8″ x 1-3/8″
- 1-5/8″ x 1-3/8″
- 1-5/8″ x 1-5/8″
- 1-7/8″ x 1-3/8″
- 1-7/8″ x 1-5/8″
- 2-3/8″ x 1-3/8″
- 2-3/8″ x 1-5/8″
- 2-3/8″ x 1-7/8″
- 2-7/8″ x 1-5/8″
- 3-1/2″ x 1-5/8″
- 4″ x 1-5/8″

Pressed Steel Tension Bands 14GA*
Sizes:
- 1-3/8″
- 1-5/8″
- 1-7/8″
- 2-3/8″
- 2-7/8″
- 3-1/2″
- 4″
- 6-5/8″

Pressed Steel Beveled Tension Bands*
Sizes:
- 1-3/8″
- 1-5/8″
- 1-7/8″
- 2-3/8″
- 2-7/8″
- 4″
- 6-5/8″

Pressed Steel Square Tension Bands
Sizes:
- 2″ x 2″
- 2-1/2″ x 2-1/2″

Pressed Steel Brace Bands 12GA*
Sizes:
- 1-3/8″
- 1-5/8″
- 2-3/8″
- 2-7/8″
- 3-1/2″
- 4″

Pressed Steel Beveled Brace Bands*
Sizes:
- 1-5/8″
- 1-7/8″
- 2-3/8″
- 2-7/8″
- 4″
- 6-5/8″

Pressed Steel Square Brace Bands
Sizes:
- 2″ x 2″
- 2-1/2″ x 2-1/2″

Pressed Steel Single Corner Arms*
Sizes:
- 2-3/8″
- 2-7/8″
- 3-1/2″
- 4″

Pressed Steel “V” Corner Arms
Sizes:
- 2-7/8″

Pressed Steel 45 Degree Barb Arms*
Sizes:
- 1-5/8″ x 1-5/8″
- 1-7/8″ x 1-7/8″
- 2-3/8″ x 1-5/8″

Pressed Steel “V” Barb Arms*
Sizes:
- 1-5/8″ x 1-5/8″
- 1-7/8″ x 1-5/8″
- 2-3/8″ x 1-5/8″

Carriage Bolts*
(Galvanized with nut included)
5/16″ x 1-1/4″
Sizes:
- 5/16″ x 6″
- 5/16″ x 1-1/4″
- 5/16″ x 2-1/2″
- 3/8″ x 2″
- 3/8″ x 3″
- 3/8″ x 2-1/2″
- 3/8″ x 3-1/2″
- 3/8″ x 1-1/2″

Floor Base Plates
(Pressed Steel, Galvanized)
Sizes:
- 4″
- 6″
- 8″

Floor Flanges
(Malleable)
Sizes:
- 1-7/8″
- 2-3/8″
- 2-7/8″

Hog Rings
(Solid in 5 lb bags)
Color: Mill or Black

Gate Holdback
(Malleable)
Sizes:
- 1-5/8″ x 1-7/8″

Hook Ties
(Aluminum)
Color: Mill or Black
Sizes:
- 6-1/2″ x 9 ga
- 8-1/4″ x 9 ga

Truss Rod Tightener*

Truss Rods*
(HDG)
Sizes:
- 3/8 x 132″

Gate Scrolls
(Pressed Steel, HDG)
Sizes:
- 18″

Tension Bars*
(Pressed Steel)
Color: Black available
Sizes:
- 3/16″ x 5/8″ x 46″
- 3/16″ x 5/8″ x 58″
- 3/16″ x 5/8″ x 70″
- 3/16″ x 5/8″ x 82″
- 3/16″ x 3/4″ x 58″
- 3/16″ x 3/4″ x 70″
- 3/16″ x 3/4″ x 82″

24in Commercial Pad Lockable Drop Rod
(Hot Dip Galvanized)

Panic Bar Kits
Includes:
- 1 Panic Bar
- 1 Adjustable Shield
- 1 Strike Bracket Extender
- 1 Keyed Cylinder
- 1 Cylinder Block Mount

Trolley for Cantilever Gates
(8 Wheel Trolley, Cast Aluminum)

4in Trolley Brackets
(Stainless Steel)
Sizes:
- Round, Heavy-duty Gage
- Square, Heavy-duty Gage
Get a Quote!
Contact Us
Our Location
324 Dennison Street
Swoyersville, PA 18704
Business Hours
Monday: 8:00am-4:00pm
Tuesday: 8:00am-4:00pm
Wednesday: 8:00am-4:00pm
Thursday: 8:00am-4:00pm
Friday: 8:00am-4:00pm